Saturday, 30 June 2012

Upgrading the Myvi 1.5 brakes = Discs + Pads

The other day I went to meet my friend that lives at Genting Sempah area and have a little bit of fun driving. After came back from there, I realise that when I brake there is a vibration felt on the steering and as my car going to stop, the brake judder a bit.

Well I could always sent to perodua to skim the brake disc (claim warranty). But it will happen again and again until one time you realize that your time wasted on skimming the disc. Of course, they will change the disc eventually right? and the circle goes on.

Brembo + Bendix MKT = Myvi 1.5 brake upgrade

As for me, I went to the nearest spare parts shop and asked for the aftermarket solutions. Fortunately, myvi has a history of brake problem and most of the shop carry a Brembo OEM rotor. The standard disc rotor for Myvi SE1.5 is similar size with the previous model of Myvi but the only differ is the pads which is slightly longer -I tried and it fits. I also manage to get the latest Bendix MKT brake pads for Myvi 1.5.

There are slight improvement in shorter stopping distance and the braking is a bit smoother.

But then again, it doesn't solve the situation where you need to press the brake pedal deeper when braking as well as the spongy feeling. Which I found that it is quite annoying. Because I did drive cars like Saga BLM and I just love the sensitivity of the brake pedal.
Posted by at

6 comments:

  1. Unknown24 January 2013 at 06:38

    Bro where do u get both item..can share? Im planning to change the rotor. Tia

    ReplyDelete
  2. Kenzkazter30 January 2013 at 07:00

    Hey, my advise is to always visit the local or nearest parts shops. normally they will carry them. avoid online trading cause they usually get it from the parts shops and then they sell it with extra profits. I bought at the damansara uptown area nearby the Tm point. I also did found others parts shops do have it such as behind thrifty PJ and other places.

    ReplyDelete
  3. SMing Liang11 July 2013 at 07:03

    Hi,u just plug and play? 09.A421.10? same with 1.3?

    ReplyDelete
  4. Kenzkazter11 July 2013 at 18:08

    ya, same disc only different pad.

    ReplyDelete
  5. SMing Liang14 July 2013 at 20:31

    brake pad model is?

    ReplyDelete
  6. EmO_Y0$hi11 April 2016 at 09:17

    Forgive my ID name it was made while I was still in school and I also apologize for noticing this blog so late. As for the soft brake pedal feel or having to press the brake pedal to brake is common and 1 way to overcome that is to go a shop with a scan tool that has an actuator function to pump 'ABS' pump. It wont be a permanent solution but it does last for a few months after 'pumping' it. Hope it helps

    ReplyDelete

Subscribe to: Post Comments (Atom)